Top Renovation

[primrose]

IMG_0705.jpeg (490.15 KiB) 385 keer bekeken

[Arnaudgli]

Some pictures of my progress. Pretty close to the end. The sailmaker also finished my new set of sails today. Hope he will sail well after all that work.

IMG_4198.JPEG (1.16 MiB) 306 keer bekeken

IMG_4197.JPEG (1.15 MiB) 306 keer bekeken

IMG_4196.JPEG (1.19 MiB) 306 keer bekeken

IMG_4195.JPEG (1.11 MiB) 306 keer bekeken

[cvandermeer]

Nice work!

[primrose]

Great! Did you have the sails made in France, or did you end up ordening them from the Netherlands?

[Arnaudgli]

Having a friend who is a sailmaker, I finally had the sails made by him for convenience.

Sails mast and boat almost burned down during the fires in my region...

but here we are, u can see the first test fitting of everything (almost, I couldn't wait until this weekend).

IMG_4427.jpeg (569.26 KiB) 149 keer bekeken

[primrose]

That's lovely!

[Arnaudgli]

So…… I think fate isn’t on my side.

At the last second, boat slip from one trailer’s roll… the roll pass through the wood.

I’m getting back to work.

IMG_4447.jpeg (786.31 KiB) 143 keer bekeken

IMG_4448.jpeg (826.34 KiB) 143 keer bekeken

[primrose]

That’s unfortunate. It’s also quite unusual for that to happen in the middle of the boat, usually if damage occurs it’s the rear most roller on the trailer damaging the front of the boat. Are you sure the trailer is properly adjusted?

[primrose]

Here’s a drawing of a typical TOP trailer. Note that the middle roller is much lower than the front and the rear. It touches the boat only when the boat is half way down the trailer.

trailer.jpg (259.44 KiB) 140 keer bekeken

[TOP_356_Soeverein]

These are some pictures from last weekend that I obviously didn’t take for this purpose, but maybe they show you something helpful anyway:

IMG_0703.jpeg
IMG_0702.jpeg

I like how 'Harken' your deck looks Siert!